Google launched last week the Android Marshmallow and open source for all manufacturers. The Mountain View giant promised that on 5 October, today, we would see the novelty reach for the Nexus line of devices owners. And as promised, the creator of Android began to release the news in the United States over the air.
If you do not want to wait for the news to get over the air on your phone, just download the factory image and install manually on your Nexus device. Remember that this method will erase all your data. If you wanted to, back up, or wait for the news to arrive via OTA for you
Required files:.
Follow the steps below:
- Download the SDK and extract the file in the root of the C: drive on your PC
- Download and install the Windows drivers
- Turn off your Nexus
- Call the holding Less Volume + Power button to enter the fastboot
- Connect your device to your PC to install the drivers
- Go to the uncompressed SDK folder on your PC
- Press Shift + right mouse button
- Select Open Command Window Here
- and enter the following commands:
- Fastboot devices
- Fastboot oem unlock
Select Yes in the window that appears on your smartphone with the Power button.
After the procedure finished type fastboot reboot and your phone will reboot. The process can take 2-3 minutes to complete.
Installation via FLASH
The process here is a bit different from the previous . You will have to extract twice the downloaded image until you reach a file in tar format. . It is recommended to use 7zip for this program
After unpacking the image, follow the steps below:
- Turn off your Nexus
- Enter Fastboot mode (Less Volume + Power button)
- Connect your Nexus to your PC
- Click the file-all.bat flash file
- Wait until the procedure is completed
- Your phone will restart in about three minutes
If you do not restart automatically, select the Recovery option when the green robot appears, press Power + Volume Plus button and select “Wipe data / Factory data reset”.
Your Nexus will be restarted with Android 6.0 with Marshmallow build MRA58K. If you have problem with the above procedure, simply manually to install the ROM on your Nexus.
Manual Method
Unpack the ROM file and pass each file by Command Prompt Windows:
- fastboot flash bootloader-nomeimmagine.img bootloader
- fastboot reboot-bootloader
- fastboot flash radio radio-devicename-nomeimmagine.img
- fastboot reboot-bootloader
- fastboot flash system system.img
- fastboot reboot-bootloader
- fastboot flash userdata userdata.img
- fastboot flash recovery recovery.img
- fastboot flash boot boot.img
- fastboot erase cache
- fastboot flash cache cache.img
- fastboot reboot
No comments:
Post a Comment